Crash Guard Safety Rails
Improve plant safety and efficiency with Crash Guard Safety Rails by reducing the costs associated with employee injury, machinery down time, insurance claims, and building repairs due to accidental collisions. Crash Guard Safety Rails are now available in two styles--our Original Crash Guard Safety Railing and our new Tuff Guard Safety Railing.Safety Rails
Formed 10 gauge steel rails made in lengths up to 12' to eliminate the need for higher cost posts - Rails can withstand impacts of 10,000 pounds traveling at 6 miles per hour
- Structural steel square tubing posts feature bolt-through connection for added strength.
- Base plates are 8" square x 1/2" thick steel
- Rounded top rails will prevent injuries and provide added personnel protection
- Fasteners included
Crash Guard safety rails install in minutes with ordinary hand tools and concrete drill. Safety rail systems protect personnel, machinery, building structures, in-plant offices, aisle ways, electrical panels, tool cribs, conveyors, finished products, receiving docks, cooling equipment, and parking areas.
Safety Rail sections shall be constructed of formed 10 gauge ATSM A36 steel welded to 1/4" steel end plates. Rail beam cross-section shall be 12" high and 2 5/8" in depth. Rails will be provided to lengths of no greater than 12' with rail lengths based upon center-of-post to center-of-post measurements in 1' increments. Rails will be delivered with 1/2" mounting hardware.
Mounting posts shall be constructed of 4” x 4” x 3/16” structural steel square tubing, welded to 8" x 8" x 1/2" ASTM A36 steel base. Standard post heights are 18" and 42" and include 4 each 5/8" wedge anchors for concrete mounting.
All surfaces to be powder coated safety yellow. All components are to be installed in accordance with supplied manufacturer's specifications.
Rail Length Chart & Architectural Specifications
|
|
| All products painted OSHA Safety Yellow | ||
| Door Track Protector | Post Protector | Bollard |
 |
 |
 |
| Column: 3/16" steel, 9/16" mount holes Base: 3/8" steel, 5/8" mount holes Fasteners not provided |
Standard Heights: 12", 18", 24" Column: 1/4", 3/8" or 1/2" steel Base: 1/4", 3/8" or 1/2" steel 9/16" mount holes Fasteners not provided |
Column: 6" steel pipe Base: 3/8" steel, 3/4" mount holes Welded steel cap 5/8" anchors provided |
