Bluff offices and plants remain open and operational at this time and we will continue to make every effort to serve the needs of our customers.
Rated for forklift use, Bluff Steel Dock Boards provide an easy transition from dock to truck. The fully-welded designs aid in safely loading and unloading freight and are available in capacities from 10,000 to 40,000 lbs. Manufacturing time 5 working days.
All steel dock boards are manufactured and tested in compliance with ANSI Standard MH30.2 and are OSHA 1910.26 compliant.
This heavy duty steel dock board is held in position using two 1″ stress-proof steel pins. When properly placed in the side pin pocket locations, these pins hold the dock board firmly in place, guarding against slippage. Simply select the proper pin hole location to utilize once the board is in place between the dock and trailer. Can be used for below dock loading situations depending on the height differential.
The TFL board offers the same function as the model T, but uses locking legs in lieu of steel pins to secure the board into place between the dock and truck. Not recommended for below dock loading.
The Speedy Board offers an easy scoop design so that drivers don’t have to leave the forklift to place the board in between the dock and trailer. Not recommended for below dock loading.
The C model “red pin” dock board utilizes full length pin pockets and two locking pins on each side, to ensure secure positioning in the case of a tough park-out situation. Can be used for below dock loading situations depending on the height differential.
Minimize the chance of low under-clearance issues with the TNB design. With the dock side bend eliminated, it’s a smoother transition for pallet jacks to take on. Not recommended for below dock loading.
The SC model is a lighter duty, more economical steel board option that can take on smaller loads when the job calls for it. Not recommended for below dock loading.